|
The Agilent E8357A network analyzer is an instrument which measures the complex transmission and reflection characteristics of two-port devices in the frequency domain. It does this by sampling the incident signal, separating the transmitted and reflected waves, and then performing ratios that are directly related to the reflection and transmission coefficients of the two-port. Frequency is swept to rapidly obtain amplitude and phase information over a band of frequencies of interest.
Agilent E8357A network analyzers utilize synthesized-frequency sources to provide a known test stimulus that can sweep across a range of frequencies or power levels. Agilent E8357A network analyzers also can perform ratioed measurements (including phase), which require multiple receivers. The Agilent E8357A can provide a wealth of knowledge about a device under test (DUT), including its magnitude, phase, and group-delay response.
- 300 kHz to 6 GHz
- 2 Port, 4 Rcvr
- 128 dB dynamic range at test port
- 143 dB dynamic range with direct receiver access
- 35 µs/point sweep speed
- COM/DCOM and SCPI programming
- TRL/LRM calibration supported
- USB controlled electronic calibration (ECal)
- Source attenuators, bias-tees and direct receiver access standard
- Compatible with Agilent's Balanced Component Measurement and Noise-Parameter Systems
- Windows 2000™ operating system
|
