Network Analyzer, 5 Hz to 3 GHz - Network Analyzers

Home : Equipment > Network Analyzers > E5061B

Keysight Technologies E5061B Network Analyzer, 5 Hz to 3 GHz

Product Status:

New / Refurbished

List Price:

$26,926

Our Price:

Request Quote

Rental Price:

Request Quote

Download Datasheet

SPECIFICATIONS

The E5061B is a network analyzer, covering the broad frequency range of 5 Hz to 3 GHz , in one instrument. Applications range from general RF measurements such as filter and amplifier test to LF (low frequency) measurements such as loop-gain evaluation of DC-DC converters. The wide frequency coverage is also suitable for PDN (power delivery network) evaluation which is becoming more common.

S-parameter test port

5 Hz to 3 GHz
Wide dynamic range: 120 dB dynamic at > 1 MHz, 90 dB at < 100 Hz

Gain-phase test port

5 Hz to 30 MHz
Switchable 1 MΩ/50 Ω input

Built-in DC bias source

0 to ±40 Vdc
Can be added to AC test signal (for both S-parameter and Gain-phase test port)
Can be used as a sweepable DC source

Compact form factor

254 mm depth

AVAILABLE EQUIPMENT OPTIONS

005	Impedance analysis for LF-RF network analyzer

010	Time domain/fault location analysis

019	Standard hard disk drive

020	Standard hard disk drive

115	Transmission/Reflection test set, 100 kHz to 1.5 GHz, 50 ohm system impedance

117	Transmission/Reflection test set, 100 kHz to 1.5 GHz, 75 ohm system impedance

135	Transmission/Reflection test set, 100 kHz to 3 GHz, 50 ohm system impedance

137	Transmission/Reflection test set, 100 kHz to 3 GHz, 75 ohm system impedance

1A7	ISO 17025 compliant calibration

1CM	Rack mount kit

1CN	Front handle kit

1CP	Rack mount and front handle kit

1E5	High stability timebase

215	S-parameter test set, 100 kHz to 1.5 GHz, 50 ohm system impedance

217	S-parameter test set, 100 kHz to 1.5 GHz, 75 ohm system impedance

235	S-parameter test set, 100 kHz to 3 GHz, 50 ohm system impedance

237	S-parameter test set, 100 kHz to 3 GHz, 75 ohm system impedance

3L5	LF-RF network analyzer with DC bias source, 5 Hz to 3 GHz

720	Add 50 ohm resistor set

810	Add keyboard

820

Add mouse

A6J	ANSI Z540 compliant calibration