Home : Equipment > Power Meters > 432A

Keysight Technologies 432A Thermistor power meter
	Product Status: New / Refurbished List Price: $0 Our Price: Request Quote Rental Price: Request Quote
SPECIFICATIONS
The Agilent 432A provides high accuracy over a wide temperature range. By measuring the output voltage of the thermistor bridges and computing the corresponding power, even higher accuracy of ±0.2 percent ±0.5 microW can be obtained. Accuracy can be maintained on even the most sensitive range because the error due to thermoelectric effect is reduced to a negligible level. Power Range: 7 ranges with full-scale readings of 10, 30 100 and 300 uW 1, 3 and 10 mW; also calibrated in dBm from -20 dBm to +10 dBm full scale in 5 dB steps Noise: Less than 0.25% of full scale peak (typical) Response Time: At recorder output, 35 ms time constant (typical) Fine Zero: Automatic, operated by front-panel switch Zero Carryover: Less than 0.50% of full scale when zeroed on most sensitive range Meter: Taut-band suspension, individually calibrated, mirror-backed scales. Milliwatt scale more than 100 mm (4.25 in) long Calibration Factor Control: 13-position switch normalizes meter reading to account for thermistor sensor calibration factor. Range 100% to 88% in 1% steps Thermistor Sensor: Thermistor sensors are required for operation of the 432A.

AVAILABLE EQUIPMENT OPTIONS

002	Parallel front and rear sensor input

003	Sensor input connector on rear panel only

008	Power sensor cable, length 5-ft (1.5 m)

009	Power sensor cable, length 10-ft (3 m)

010	Power sensor cable, length 20-ft (6.1 m)

011	Power sensor cable, length 50-ft (15.2 m)

012	Power sensor cable, length 100-ft (30.5 m)

910	Extra operating and service manual set

A6J	ANSI Z540 compliant calibration test data

CAB10

Cable, 20 Ft Long

CAB11

CABLE, 50 FT LONG

CAB12

Cable, 100 Ft Long

Recently Viewed Items

432A Keysight Technologies

Clear List