Electronic load module, 0-60V, 30A,150 W dc, for N330X mainframes. 1 slot - DC Electronic Loads

Home : Equipment > DC Electronic Loads > N3302A

Keysight Technologies N3302A Electronic load module, 0-60V, 30A,150 W dc, for N330X mainframes. 1 slot

Product Status:

New / Refurbished

List Price:

$1,653

Our Price:

Request Quote

Rental Price:

Request Quote

Download Datasheet

SPECIFICATIONS

The Agilent N3302A is a 150 W electronic load module for use in either the N3300A or N3301A electronic load mainframe in system applications. The N3302A load module is fast and accurate, for programming in constant current, constant voltage, or constant resistance modes, or for making voltage, current or power measurements. The N3302A can also digitize waveforms.

A single GPIB address is all you need for complete control and read-back of the N3302A load module within a single N3300A or N3301A mainframe. The N3302A electronic load provides fast operation and the accurate programming and read-back needed for high-volume DC power supply test systems.

Input Ratings

Current: 0 - 30 A
Voltage: 0 - 60 V
Maximum Power @ 40°C: 150 W
Typical Minimum Operating Voltage @ Full Scale Current: 1.2 V

Constant Current Mode

Low Range/High Range: 3 A/30 A
Regulation: 10 mA
Low Range Accuracy: 0.1% + 5 mA
High Range Accuracy: 0.1% + 10 mA

Constant Voltage Mode

Low Range/High Range: 6 V/60 V
Regulation: 5 mV
Low Range Accuracy: 0.1% + 3 mV
High Range Accuracy: 0.1% + 8 mV

Constant Resistance Mode

Range 1 (I >10% of current rating): 0.067-4 Ω
Range 2 (I >1% of current rating): 3.6-40 Ω
Range 3 (I >0.1% of current rating): 36-400 Ω
Range 4 (I >0.01% of current rating): 360-2000 Ω

AVAILABLE EQUIPMENT OPTIONS

800	Rack-mount kit for two N3301A Mainframes mounted side-by-side. *require either the slide kit (p/n 1494-0059) or support rails (E3663AC) to support the weight of the load mainframe.

908	Rack-mount kit (Two p/n 5062-3974 for a N3300A, or p/n 5062-3960 for one N3301A). For the N3301A, the kit includes a blank filler panel. *require either the slide kit (p/n 1494-0059) or support rails (E3663AC) to support the weight of the load mainframe.

909	Rack-mount kit with handles for N3300A. *require either the slide kit (p/n 1494-0059) or support rails (E3663AC) to support the weight of the load mainframe.

910	Extra manual set, including one each of the operating manual, programming reference manual, and service manual. The programming manual is available with the mainframes, and therefore not with the modules.

A6J	ANSI/NCSL Z540 calibration certificate

UJ1	8mm screw terminal

UJG	Manually tightenend connector

UK6	Commercial calibration with test results data