|
The N2792A differential probe provides superior high-speed differential signal measurements required for today’s high-speed power measurements, vehicle bus measurements and high-speed digital system designs. The N2792A differential probes offer 10:1 attenuation setting, allowing them to be used for a broad range of applications. The probe comes with a pair of alligator clips and hook tip clips for use with large and small components in tight places. The differential probes has an input resistance of 1 MΩ and low input capacitance of 3.5 pF to minimize circuit loading. The N2792A probe is compatible with any oscilloscope with 50 Ω BNC input. The probe can be powered by any USB port on scope or computer, or by internal batteries (1x 9V battery included with each probe). - Wide dynamic range for various applications : ±20V differential, ±60V common mode
- High input resistance and low input capacitance for low probe loading: 1 MΩ//3.5 pF between inputs
- Compatible with any 50 Ω BNC input, powered by a 9V battery or USB cable (included)
- Ideal for high speed power measurements, digital differential buses and vehicle serial buses (CAN, LIN, Flexray)
|
