6 GHz Infiniium Scope, 4 Ch, 20 GSa/s per Ch, 262k Memory/Ch, Windows XP - Oscilloscopes

Home : Equipment > Oscilloscopes > 54855A

Keysight Technologies 54855A 6 GHz Infiniium Scope, 4 Ch, 20 GSa/s per Ch, 262k Memory/Ch, Windows XP

Product Status:

New / Refurbished

List Price:

$59,240

Our Price:

Request Quote

Rental Price:

Request Quote

Download Datasheet

SPECIFICATIONS

The 54855A Infiniium oscilloscope and InfiniiMax 1134A probing system, (1134A probe amp plus the E2668A single-ended connectivity kit and/or E2669A differential connectivity kit), provides full real-time bandwidth of up to 7 GHz and is supported on every channel by the 20 GSa/s sample rate. This industry-leading sample rate produces more accurate and repeatable measurements, avoiding measurement error and signal alliasing due to under sampling of the waveform. The innovative InfiniiMax probing system supports even the most demanding mechanical access requirements without sacrificing performance.

6-GHz Bandwidth Oscilloscope
4 channels
6 GHz hardware bandwidth (guaranteed specification) and 7 GHz bandwidth (typical characteristic) with option-008 enhanced bandwidth software
20 GSa/s sample rate on all four channels simultaneously
Up to 1 Mpts MegaZoom deep memory at all sample rates and 32 Mpts MegaZoom deep memory at 2 GSa/s and slower sample rates.
Trigger jitter as low as 1.0 ps rms
Each InfiniiMax probe amplifier supports both differential and single-ended measurements for a more cost-effective solution
Unrivaled InfiniiMax probing accessories support browsing, solder-in, and socket use models at the maximum performance available
The 7 GHz InfiniiMax 1134A probe and E2668A/E2669A connectivity kits (all sold seperately) are recommended for the Infiniium 54855A oscilloscope
New removable hard disk drive option (opt. 017)
54855A Option 008, 7 GHz Enhanced Bandwidth Oscilloscope

1134A InfiniiMax Probe Specifications

Bandwidth: 7 GHz
Dynamic Range: +/- 2.5V
DC Offset Range: +/- 12V
Maximum Voltage: +/- 30V
Differential Input R: 50 k ohm. Differential Input C: 0.27-0.34 pF.
Single Ended Input R: 25 k ohm. Single Ended Input C: 0.44-0.67 pF.
Differential SMA Probe Head for InfiniiMax probes

AVAILABLE EQUIPMENT OPTIONS

001	1M MegaZoom memory/ch upgrade for 5485XA oscilloscopes, includes 32M Megazoom memory/ch

002	EZJIT jitter analysis software package for Infiniium 54854A - installed

003	High-Speed SDA and Clock Recovery - installed

004	EZJIT Plus software

006	Application Integration Package - installed

008	7 GHz Enhanced Bandwidth Software Option

017	Removable hard drive for Infiniium 54850 series oscilloscopes

018	Standard hard drive for Infiniium 54850 series oscilloscopes

021	Low-Speed SDA - installed

1134A

7 GHz InfiniiMax Probe Amplifier

1CM	Rackmount Kit

600	89601A Vector Signal Analysis Software with options 200-300

601	89601A Vector signal analysis software with options 200-300-AYA

602	89601A Vector signal analysis software with options 200-300-AYA-105

A6J	ANSI Z540 Compliant Calibration

ABJ	Japan - Japanese localization

N5393A

PCI Express compliance application software

USB	TDSUSBS; USB2.0 Compliance Test SW Only