Signal Analyzer 20 Hz to 26.5 GHz - Signal Analyzers

Home : Equipment > Signal Analyzers > FSQ26

Rohde and Schwarz FSQ26 Signal Analyzer 20 Hz to 26.5 GHz

Product Status:

New / Refurbished

List Price:

$91,390

Our Price:

Request Quote

Rental Price:

Request Quote

Download Datasheet

SPECIFICATIONS

The Rohde - Schwarz FSQ26 is a Signal Analyzer that combines signal analysis with the dynamic range of a high-end spectrum analyzer and a demodulation bandwidth of 28 MHz, the FSQ26 can capture and analyze the full breadth of an 802.11a WLAN or multiple carrier W-CDMA signal.

RF Performance

DANL with preamplifier < -152 dBm (10Hz)
SSB phase noise typ. - 133 dBc (1Hz) at 10 kHz offset, CF 640 MHz
Phase-noise typ. - 160 dBc/Hz @ 10 MHz offset, CF 640 MHz
TOI typ. ±25 dBm
1-dB-compression point + 13 dBm
3GPP ACLR 77 dB, 84 dB with noise correction
ACLR for 4-carrier scenario: 77 dB with noise correction

Accuracy

0.3 dB total level uncertainty up to 3.6 GHz
<0.1 dB linearity error down to -70 dB

IQ Downconverter

IF digitizer 14 bit 81.6 MHz (20.4 MHz IF)
IF digitizer 326.4 MHz (option FSQ-B72)
IQ Bandwidth (RF) 28 MHz (up to 120 MHz mwith option FSQ-B72)
SFDR > 80 dB
IQ memory 16 Msamples each I and Q; output via GPIB or LAN
Sample rate: cont. settable from 10 kHz to 81.6 MHz; e.g. 20 MHz for IEEE802.11a

Speed

2.5ms sweep time in frequency domain
1 μs sweep time in time domain
up to 70 remote measurements/s via GPIB
up to 80 manual measurements/s (screen update)

AVAILABLE EQUIPMENT OPTIONS

FS~K10

GSM/EDGE/EDGE Evolution Measurements

FS~K110

TETRA/TEDS measurements for the R&S®FSU / R&S®FSQ

FS~K15

VOR/ILS Measurement Demodulator for R&S®FSMR/R&S®FSU/R&S®FSQ - Analysis for VOR and ILS signals

FS~K30

Application Firmware for Noise Figure and Gain Measurements for R&S®FSP, R&S®FSU and R&S®FSQ (preamplifier recommended, e.g. R&S®FSU-B25) Outperforming any conventional noise measurement system

FS~K40

Application Firmware for phase noise measurements

FS~K5

GSM/EDGE Application Firmware

FS~K7

AM/FM/PM Measurement Demodulator for R&S®FSQ/FSU/FSP/FSUP Analyzers and the R&S®ESCI/ESPI Test Receivers

FS~K72

3GPP BTS/Node B FDD Application Firmware

FS~K73

3GPP transmitter measurements with R&S®FSQ signal analyzers and R&S®FSU, R&S®FSG, R&S®FSUP, R&S®FSMR, R&S®FMU and R&S®FSP spectrum analyzers

FS~K73+

3GPP HSPA+ UE Application Firmware

FS~K74

3GPP HSDPA Base Transceiver Station (BTS) Application Firmware

FS~K74+

3GPP HSPA+ BTS Application Firmware

FS~K76

3GPP TD-SCDMA BTS Application Firmware

FS~K77

3GPP TD-SCDMA Mobile Station (MS) Application Firmware

FS~K8

Bluetooth® Application Firmware

FS~K82

cdma2000® / IS-95 (cdmaOne) / 1xEV-DV BTS Test Application Firmware

FS~K83

cdma2000® /1xEV-DV MS Application Firmware

FS~K84

cdma2000® 1xEV-DO Base Station Test Application Firmware (including Rev A)

FS~K9

Power Sensor Measurements

FSP~B10

External Generator Control

FSQ~B100

I/Q Memory Extension 235 Msamples

FSQ~B102

I/Q Memory Extension 705 Msamples

FSQ~B17

Digital Baseband Interface

FSQ~B18

Removable Hard Disk

FSQ~B19

Second Hard Disk for FSQ-B18

FSQ~B23

Preamplifier 3.6 to 26 GHz for FSQ26 (requires FSU-B25)

FSQ~B71

baseband inputs DC to 36 MHz

FSQ~B72

I/Q Bandwidth Extension

FSQ~K100

3GPP LTE transmitter measurements on base stations and modules with the R&S®FSG and R&S®FSQ Signal Analyzer

FSQ~K101

3GPP LTE transmitter measurements on user equipment and modules with the R&S®FSG and R&S®FSQ Signal Analyzer

FSQ~K102

3GPP LTE transmitter measurements on base stations and modules with the R&S®FSG and R&S®FSQ Signal Analyzer

FSQ~K104

Transmitter measurements on LTE signals

FSQ~K105

Transmitter measurements on LTE signals

FSQ~K70

Firmware General Purpose Vector Signal Analyzer Universal demodulation, analysis and documentation of digital radio signals

FSQ~K90

WLAN 802.11a/b/g/j Application Firmware

FSQ~K91

WLAN Application Firmware WLAN IEEE 802.11 a/b/g/j TX Application Firmware

FSQ~K91n

R&S®FSQ-K91 Upgrade to IEEE 802.11n

FSQ~K92

Application Firmware TX measurements on OFDM signals in line with IEEE 802.16-2004

FSQ~K92U

Application Firmware R&S®FSQ-K92 to R&S®FSQ-K93 Upgrade (R&S®FSQ-K92 required)

FSQ~K93

TX measurements on OFDMA signals in line with IEEE 802.16-2004, IEEE 802.16e-2005

FSQ~K94

TX measurements on WiMAXTM MIMO signals in line with IEEE 802.16e-2005

FSU~B12

Output attenuator, 0 dB to 70 dB, for FSU-B9

FSU~B4

Low-Aging OXCO

FSU~B9

Tracking Generator, 100 kHz to 3.6 GHz