|
The Model 4000W1000 is a self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability.
-
RATED OUTPUT POWER: 3600 watts minimum
-
INPUT FOR RATED OUTPUT: .1.0 milliwatts maximum
-
POWER OUTPUT @ 3dB compression
-
Nominal: 4400 watts
-
Minimum: 2800 watts
-
POWER OUTPUT @ 1dB
-
Nominal: 3400 watts
-
Minimum: 2200 watts
-
FLATNESS:
-
FREQUENCY RESPONSE: 80-1000 MHz instantaneously
-
GAIN (at maximum setting): 66 dB minimum
-
GAIN ADJUSTMENT (continuous range): 18 dB minimum
-
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
-
OUTPUT IMPEDANCE: 50 ohms nominal
-
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
-
HARMONIC DISTORTION: Minus 20 dBc maximum at 2800 watts
-
THIRD ORDER INTERCEPT POINT: 73 dBm typical
-
RF POWER DISPLAY: 0-6000 watts
-
PRIMARY POWER (specify voltage):
-
200-250 VAC, Delta Connected (4 wire)
-
360-435 VAC, Wye Connected (5 wire)
-
50/60 Hz, 3 phase
-
48 kVA Maximum
-
CONNECTORS:
-
RF input: Type N female on rear panel
-
RF output: Type 1 5/8 EIA on top panel
-
External leveling inputs: Type BNC female on front panel
-
Pulse modulation input: Type BNC female on front panel
-
Detected RF output: Type BNC female on front panel
-
Safety interlock: 15 pin female subminiature D on rear panel
-
Remote control: 24 Pin female GPIB/IEEE-488 and 9-pin RS-232 connectors on rear panel
-
Remote control (fiber optic): ST connector. Tx and Rx RS-232
-
COOLING: Forced air (self contained fans)
- WEIGHT (approximate): 1542 kg (3400 lb)
|
