|
The Model 150W1000 is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability.
-
RATED OUTPUT POWER: 150 watts
-
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
-
POWER OUTPUT @ 3dB compression
-
Nominal: 140 watts
-
Minimum: 120 watts
-
POWER OUTPUT @ 1dB compression
-
Nominal: 120 watts
-
Minimum: 100 watts
-
FLATNESS: ±2.0 dB maximum; 1.5 dB typical; ±0.8 dB with internal leveling
-
FREQUENCY RESPONSE: 80-1000 MHz instantaneously
-
GAIN (at maximum setting): 52 dB minimum
-
GAIN ADJUSTMENT (continuous range): 18 dB minimum (4096 steps remote)
-
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
-
OUTPUT IMPEDANCE: 50 ohms nominal
-
MISMATCH TOLERANCE Will operate without damage or oscillation with any magnitude and phase of source and load impedance. Will limit reflected power to 100 watts.
-
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
-
HARMONIC DISTORTION: Minus 20 dBc maximum at 100 watts
-
THIRD ORDER INTERCEPT POINT: 58 dBm typical
-
RF POWER DISPLAY: 0-200 watts
-
PRIMARY POWER (user must specify)
-
90 - 264 VAC
-
40/400Hz, single phase
-
1200 watts maximum
-
CONNECTORS
-
SAFETY INTERLOCK: 15 pin Subminiature D
-
COOLING: Forced air (self contained fans)
|
