|
The Model 75A400 amplifier is a portable, self-contained, air-cooled, broadband, solid state amplifier unit designed for laboratory applications where instantaneous bandwidth, high gain and moderate power output are required.
-
RATED POWER OUTPUT : 75 watts minimum
-
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
-
POWER OUTPUT @ 3dB COMPRESSION
-
Nominal: 100 watts
-
Minimum: 75 watts
-
POWER OUTPUT @ 1dB COMPRESSION
-
Nominal: 75 watts
-
Minimum: 50 watts
-
FLATNESS: ± 1.5 dB maximum
-
FREQUENCY RESPONSE: 10 kHz - 400 MHz instantaneously
-
GAIN (at maximum setting): 49 dB minimum
-
GAIN ADJUSTMENT (continuous range): 18 dB minimum
-
INPUT IMPEDANCE: 50 ohms, VSWR 1.5:1 maximum
-
OUTPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
-
MISMATCH TOLERANCE: 100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
-
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
-
NOISE FIGURE (above 1.0 MHz): 6 dB typical
-
HARMONIC DISTORTION: Minus 20 dBc maximum at 50 watts
-
THIRD ORDER INTERCEPT POINT: 57 dBm typical
-
PRIMARY POWER:
-
CONNECTORS
-
REMOTE INTERLOCK: 15 pin subminature D
-
COOLING: Forced air (self contained fans)
|
