|
The Model 1W1000B amplifier is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required.
-
RATED OUTPUT POWER: 1.0 watts minimum
-
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
-
POWER OUTPUT @ 3dB compression
-
Nominal: 2.5 watts
-
Minimum: 1.0 watts
-
POWER OUTPUT @ 1dB compression
-
Nominal: 2 watts
-
Minimum: 1.0 watts
-
FLATNESS
-
±0.5 dB typical
-
±1.0 dB maximum
-
FREQUENCY RESPONSE: 100 kHz-1000 MHz instantaneously
-
GAIN: 30 dB minimum
-
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
- OUTPUT IMPEDANCE: 50 ohms nominal
- MISMATCH TOLERANCE 100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
- MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal.
- HARMONIC DISTORTION: Minus 20 dBc maximum at 1.0 watts
- THIRD ORDER INTERCEPT POINT: 42 dBm typical
-
PRIMARY POWER
- 90-264 VAC
- 47-440Hz, single phase
- 60 watts maximum
- CONNECTORS: See Model Configuration
- COOLING: Forced air (self-contained fan)
- WEIGHT: See Model Configuration
- SIZE (WxHxD): See Model Configuration
|
