|
The Model 15S1G4 is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required.
-
RATED POWER OUTPUT: 15 watts minimum
-
POWER OUTPUT @ 3dB COMPRESSION
-
Nominal: 20 watts
-
Minimum: 16 watts
-
POWER OUTPUT @ 1dB COMPRESSION
-
Nominal: 18 watts
-
Minimum: 14 watts
-
FLATNESS
-
±1.5 dB typical
-
±2.0 dB maximum
-
FREQUENCY RESPONSE: 0.8 - 4.2GHz instantaneously
-
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
-
GAIN (at maximum setting): 42 dB minimum
-
GAIN ADJUSTMENT (Continuous Range): 10 dB minimum (4096 steps remote)
-
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
- OUTPUT IMPEDANCE: 50 ohms, nominal
- MISMATCH TOLERANCE 100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
- MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
- HARMONIC DISTORTION: Minus 20 dBc maximum at 15 watts
- SPURIOUS: Minus 73 dBc typical
- THIRD ORDER INTERCEPT POINT: 52 dBm typical
- NOISE FIGURE: 10 dB typical
-
PRIMARY POWER (selected automatically)
-
90-132, 180-264 VAC
- 50/60 Hz, single phase
- 150 watts maximum
- CONNECTORS
- RF: Type N female
- REMOTE INTERFACES
- IEEE-488: 24 pin female
- RS-232: 9 pin Subminiature D (female)
- RS-232 (fiber optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
- SAFETY INTERLOCK: 15 Pin Subminiature D
- COOLING: Forced air (self contained fans)
|
