The Model 30S1G4 is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.

• RATED POWER OUTPUT:   30 watts minimum
• INPUT FOR RATED OUTPUT:   1.0 milliwatt maximum
• POWER OUTPUT @ 3dB COMPRESSSION
  • Nominal:   35 watts
  • Minimum:   30 watts
• POWER OUTPUT @ 1dB COMPRESSION
  • Nominal:   30 watts
  • Minimum:   24 watts
• FLATNESS
  • ±1.5 dB typical
  • ±2.0 dB maximum
• FREQUENCY RESPONSE:   0.8–4.2 GHz instantaneously
• GAIN (at maximum setting):   45 dB minimum
• GAIN ADJUSTMENT
  • (Continuous Range)
  • 10 dB minimum
  • (4096 steps remote)
• INPUT IMPEDANCE:   50 ohms, VSWR 2.0:1 maximum
• OUTPUT IMPEDANCE:   50 ohms, nominal
• MISMATCH TOLERANCE:   100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
• MODULATION CAPABILITY:   Will faithfully reproduce AM, FM, or pulse Modulation appearing on the input signal
• THIRD ORDER INTERCEPT:   55 dBm typical
• NOISE FIGURE:   10 dB typical
• HARMONIC DISTORTION:   Minus 20 dbc, max at 30 watts
• SPURIOUS:   Minus 73 dbc Typ.
• PHASE LINEARITY:   ± 1.0 deg/100 MHz, Typ
• PRIMARY POWER:   (Selected Automatically)
• 90-132, 180-264 VAC
• 50/60 Hz, single phase
• 280 watts maximum
• CONNECTORS
• RF:   Type N female
• REMOTE INTERFACES
• IEEE-488:   24 pin female
• RS-232:   9 pin Subminiature D (female)
• RS-232 (fiber optic):   Type ST
• USB 2.0:   Type B
• Ethernet:   RJ-45
• SAFETY INTERLOCK:   15 pin Subminiature D
• COOLING:   Forced air (self contained fans)