|
The Model 60S1G4 is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.
-
RATED POWER OUTPUT: 60 watts minimum
-
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
-
POWER OUTPUT @ 3dB COMPRESSSION
-
Nominal: 70 watts
-
Minimum: 60 watts
-
POWER OUTPUT @ 1dB COMPRESSION
-
Nominal: 65 watts
-
Minimum: 50 watts
-
FLATNESS
-
±1.5 dB typical
-
±2.0 dB maximum
-
FREQUENCY RESPONSE: 0.8–4.2 GHz instantaneously
-
GAIN (at maximum setting): 47.8 dB minimum
-
GAIN ADJUSTMENT
-
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
- OUTPUT IMPEDANCE: 50 ohms, nominal
-
MISMATCH TOLERANCE 100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
-
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse Modulation appearing on the input signal
-
THIRD ORDER INTERCEPT: 58 dBm typical
-
NOISE FIGURE: 10 dB typical
-
HARMONIC DISTORTION: Minus 20 dBc max at 60 watts
-
SPURIOUS: Minus 73 dBc Typ.
-
PHASE LINEARITY: ±1.0 deg/100 MHz, Typ
-
PRIMARY POWER (Selected Automatically)
-
90-132, 180-264 VAC
-
50/60 Hz, single phase
-
405 watts maximum
-
CONNECTORS
-
RF: Type N female
-
REMOTE INTERFACES
-
SAFETY INTERLOCK: 15 pin Subminiature D
-
COOLING: Forced air (self contained fans)
|
