The Model 40S4G11 is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. The Model 40S4G11, when used with a sweep generator, will provide a minimum of 40 watts of RF power instantaneously from 4 to 10.6 GHz. RATED POWER OUTPUT: 40 watts minimum POWER OUTPUT @ 3dB COMPRESSION Nominal: 45 watts Minimum: 40 watts POWER OUTPUT @ 1dB COMPRESSION Nominal: 40 watts Minimum: 36 watts FLATNESS ±2.0 dB typical ±3.0 dB maximum FREQUENCY RESPONSE: 4.0 – 10.6 GHz instantaneously INPUT FOR RATE OUTPUT: 1.0 milliwatt maximum, 0 dBm GAIN (at maximum setting): 46 dB minimum GAIN ADJUSTMENT (Continuous Range): 10 dB minimum INPUT IMPEDANCE: 50 ohms, VSWR 2.5:1 maximum OUTPUT IMPEDANCE: 50 ohms, nominal MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal HARMONIC DISTORTION: Minus 20 dBc maximum at 40 watts THIRD ORDER INTERCEPT POINT: 52 dBm typical RF POWER DISPLAY: Digital, forward, and reflected PRIMARY POWER (selected automatically): 90-132, 180-264 VAC 50/60 Hz, single phase <1300 watts maximum CONNECTORS RF Input: See Model Configurations RF Output: Type N female on rear panel External Leveling Inputs: Type BNC female on front panel Pulse Modulation Input: Type BNC female on front panel Detected RF Output: Type BNC female on front panel REMOTE INTERFACES IEEE-488: 24 pin female RS-232: 9 pin Subminiature D (female) RS-232 (Fiber-optic): Type ST USB 2.0: Type B Ethernet: RJ-45 SAFETY INTERLOCK: 15 Pin Subminiature D COOLING: Forced air (self contained fans)
