The Model 10S6G18A is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. The Model 10S6G18A, when used with a sweep generator, will provide a minimum of 10 watts of RF power instantaneously from 6 to 18 GHz. The 10 watt model can be expanded in an incremental fashion to 20 or 40 watts inside the same cabinet.

• RATED POWER OUTPUT:   10 watts minimum
• POWER OUTPUT @ 3dB COMPRESSION
  • Nominal:   13 watts
  • Minimum:   10 watts
• POWER OUTPUT @ 1dB COMPRESSION
  • Nominal:   12 watts
  • Minimum:   9 watts
• FLATNESS
  • ±2.0 dB typical
  • ±3.0 dB maximum
• FREQUENCY RESPONSE:   6–18 GHz instantaneously
• INPUT FOR RATED OUTPUT:   1.0 milliwatt maximum, 0 dBm
• GAIN (at maximum setting):   40 dB minimum
• GAIN ADJUSTMENT (Continuous Range):   10 dB minimum
• INPUT IMPEDANCE:   50 ohms, VSWR 2.5:1 maximum
• OUTPUT IMPEDANCE:   50 ohms, nominal
• MISMATCH TOLERANCE    100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
• MODULATION CAPABILITY:   Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal.
• HARMONIC DISTORTION:   Minus 20 dBc maximum at 10 watts
• THIRD ORDER INTERCEPT POINT:   47 dBm typical
• PRIMARY POWER (selected automatically)
  • 90–132, 180–264 VAC
  • 50/60 Hz, single phase
  • <550 watts maximum
• CONNECTORS
  • RF INPUT & OUTPUT:   See Model Configurations
  • REMOTE INTERFACES
    • IEEE-488:   24 pin female
    • RS-232:   9 pin Subminiature D (female)
    • RS-232 (Fiber-optic):   Type ST
    • USB 2.0:   Type B
    • Ethernet:   RJ-45
• SAFETY INTERLOCK:   15 Pin Subminiature D
• COOLING:   Forced air (self contained fans)
• SIZE:   50.3 X 24.9 X 54.6cm (19.8 x 9.8 x 21.5 in)
• WEIGHT
  • with enclosure removed for rack mounting:   22 kg (48 lb)
  • with enclosure:   32 kg (70 lb)