|
The Model 500T2z5G7z5 is a self contained, forced air cooled, broadband traveling wave tube (TWT) microwave amplifier designed for applications where instantaneous bandwidth and high gain are required. A reliable TWT provides a conservative 500 watts minimum at the amplifier output connector. Stated power specifications are at fundamental frequency. -
POWER (FUNDAMENTAL), CW, @ OUTPUT CONNECTOR -
FLATNESS: ±8 dB maximum, equalized for ±5 dB maximum at rated power -
FREQUENCY RESPONSE: 2.5 - 7.5 GHz instantaneously -
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum -
GAIN (AT MAXIMUM SETTING): 57 dB minimum -
GAIN ADJUSTMENT (CONTINUOUS RANGE): 35 dB minimum -
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum -
OUTPUT IMPEDANCE: 50 ohms, VSWR 2.5:1 typical -
MISMATCH TOLERANCE: Output power foldback protection at reflected power exceeding 100 watts. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off. -
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal. AM peak envelope power limited to specified power. -
NOISE POWER DENSITY -
HARMONIC DISTORTION: Minus 3dBc maximum, Minus 3.5dBc typical -
PRIMARY POWER: 208 VAC ± 10% three phase 50/60 Hz 3.5 KVA maximum -
CONNECTORS -
RF input: Type N female on rear panel -
RF output: 7-16 DIN female on rear panel -
RF output sample port: Type N female on rear panel -
GPIB: IEEE – 488 (f) on rear panel -
Interlock: DB-15 (f) on rear panel -
COOLING: Forced air (self contained fans), air entry and exit in rear. -
SIZE (W x H x D): 50.8 x 25.4 x 68.6 cm, 20 x 10 x 27 in -
WEIGHT (approximate): 55 kg, 120 lbs.
|
