-
POWER (fundamental), CW, @ OUTPUT CONNECTOR
-
FLATNESS: ±11 dB maximum, equalized for ±3 dB maximum at rated power
-
FREQUENCY RESPONSE: 7.5 - 18 GHz instantaneously
-
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
-
GAIN (at maximum setting): 57 dB minimum
-
GAIN ADJUSTMENT (continuous range): 35 dB minimum
-
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
-
OUTPUT IMPEDANCE: 50 ohms, VSWR 2.5:1 typical
-
MISMATCH TOLERANCE: Output power foldback protection at reflected power exceeding 100 watts. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May scillate with unshielded open due to coupling to input. Should not be tested with connector off.
-
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal. AM peak envelope power limited to specified power.
-
NOISE POWER DENSITY: Minus 70 dBm/Hz (maximum), Minus 72 dBm/Hz (typical)
-
HARMONIC DISTORTION: Minus 20 dBc maximum, Minus 22 dBc typical
-
PRIMARY POWER: 208 VAC ± 10% three phase 50/60 Hz 4 KVA maximum
-
CONNECTORS
-
RF input: Type N precision female on rear panel
-
RF output: Type WRD-750D24 waveguide flange on rear panel
-
RF output sample port: Type N precision female on rear panel
-
GPIB: IEEE – 488 (f) on rear panel
-
Interlock: DB-15 (f) on rear panel
-
COOLING: Forced air (self contained fans), air entry and exit in rear.
-
SIZE (W x H x D): 50.3 x 40.6 x 68.6 cm, 19.8 x 16 x 27 in
-
WEIGHT (approximate): 91 kg, 200 lb
