|
The Model 50WD1000 is a portable, self-contained, air-cooled, broadband, solid state amplifier designed for applications where extensive bandwidth and high gain are required. Push-pull circuitry is utilized in all of the high power stages in the interest of lowering distortion and improving stability.
-
RATED OUTPUT POWER: 50 watts minimum
-
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
-
POWER OUTPUT @ 3dB COMPRESSION
-
Nominal: 60 watts
-
Minimum: 40 watts
-
POWER OUTPUT @ 1dB COMPRESSION
-
Nominal: 50 watts
-
Minimum: 30 watts
-
FLATNESS
-
±1.0 dB typical
-
±1.5 dB maximum
-
FREQUENCY RESPONSE: DC-1000 MHz (In two bands selected automatically or manually)
-
GAIN: 47 dB minimum
-
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
-
OUTPUT IMPEDANCE: 50 ohms, nominal
-
MISMATCH TOLERANCE 100% of rated output power. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
-
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal.
-
HARMONIC DISTORTION: Minus 20 dBc maximum at 35 watts
-
THIRD ORDER INTERCEPT POINT: 56 dBm typical
-
PRIMARY POWER (selected automatically)
-
RF CONNECTORS: See Model Configuration
-
REMOTE CONTROL: 25 Pin Subminiature D on rear panel
- COOLING: Forced air (self contained fans)
|
