|
Xantrex (Elgar, Sorensen and Xantrex Products) XDL35-5TP Power Supply, Triple Output, 0-35V, 0-3A or 0-15V, 0-5A (x2), 2.7V, 3.3V or 5.0V, 1 A (x1), With GPIB, RS-232, USB Interface
|
|
The XDL series offers an unparalleled level of precision. Voltage and current are controlled using instrumentation quality 16 bit DACs enabling voltages to be set to 1mV resolution even at full output. Indeed, the accuracy is sufficient for the XDL to be used as a calibration source for some hand-held DMMs. The XDL series provides multiple ranges for increased current capability at lower voltages. The XDL35-5, for example, is a 100 Watt power supply with three ranges. The main range offers 0 to 35 Volts at up to 3 Amps. The higher current range provides up to 5 Amps for voltages up to 15 Volts. A further low current range provides an enhanced current setting and measurement resolution of 0.1 mA.
The XDL series uses pure linear technology and offers unrivalled performance in regulation, output noise and dynamics. Line and load regulation are close to the limit of measureability. Recovery time from transient current pulses is better than 50µs. Output noise is less than 350µV rms in CV mode and down to 20µA rms in CI mode - dramatically better than other power supplies.
- Constant voltage or constant current
- All linear regulation, <0.01%
- Resolution 1 mV, 1 mA or 0.1 mA
- Ripple <0.35 mV rms
- Keypad or knob entry
- Remote sensing
- Stores 10 settings (30 on XDL35-5T)
- Tracking, series or parallel mode on XDL35-5T (main outputs only)
- OVP and OCP with alarm output
- GPIB, RS-232, USB Interface ("P" Models)
|
