Home : Brand > Amplifier Research > 10000LM45

Amplifier Research 10000LM45 10,000 Watt CW, 10 kHz - 100 MHz (aircooled)
	Product Status: New / Refurbished List Price: $476,300 Our Price: Request Quote Rental Price: Request Quote   Download Datasheet
SPECIFICATIONS
The Model 10000LM45 is a self-contained, broadband amplifier designed for laboratory applications where broad frequency range, high gain, and high power output are required. The combination of a high power internal load, specially designed, protective circuitry, and rugged liquid cooled tetrodes provides a truly high power broadband amplifier capable of driving any load impedance without power foldback or fear of damage. A rear panel mounted connector is provided for remote control of the POWER, STANDBY, and OPERATE functions. When connected to our CP2001 or CP3000, these functions may be accomplished by TTL or IEEE bus. A continuously variable input attenuator permits the operator to adjust the output level as desired. AR model DC4000 dual directional coupler is available to permit monitoring of forward and reflected power levels. This M45 version comes with a liquid to air cooled heat exchanger and requires no external cooling water. The heat exchanger may be installed indoors or outdoors to reduce inside noise and heat load. POWER OUTPUT, CW Nominal:   12,600 watts Minimum:   10,000 watts Linear @ 1dB compression:   7500 watts minimum FLATNESS:   ±1.5 dB FREQUENCY RESPONSE:   10 kHz - 100 MHz INPUT FOR RATED OUTPUT:   1.0 milliwatt maximum GAIN (at maximum setting):   70 dB minimum GAIN ADJUSTMENT (continuous range):   18 dB minimum INPUT IMPEDANCE:   50 ohms, VSWR 1.5:1 maximum OUTPUT IMPEDANCE:   50 ohms, nominal MISMATCH TOLERANCE*:   100% of rated power without foldback. Will operate without damage, or oscillation with any magnitude and phase of source and load impedance. * See Application Note #27 MODULATION CAPABILITY:   Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal HARMONIC DISTORTION:   Minus 15 dBc maximum at 7500 watts BLANKING CHARACTERISTICS Signal (into 50 ohms):   Plus 4.0 to 6.0 VDC Delay time Signal on to RF off:   5 microseconds maximum Signal off to RF on:   25 microseconds maximum RF rise/fall time:   10 nanoseconds maximum PRIMARY POWER (specify one) 200/208 ±5% VAC, 3 phase, 60 Hz 380/415 ±5% VAC, 3 phase, 50/60 Hz 400/415 ± 5% VAC, 3 phase, 50/60 Hz 75 kVA maximum CONNECTORS RF input:   Type BNC female on front panel RF output:   Type EIA 1 5/8 on rear panel (male) Blanking :   Type BNC female on front panel Remote control:   25 pin female subminiature D on rear panel COOLING:   Air cooled via liquid to air heat exchanger operating at 45°C maximum ambient air temperature. WEIGHT (amplifier/heat exchanger):   1134 kg (2500 lb) SIZE (WxHxD) Amplifier:    68.8 x 149.9 x 82.6 cm 27.1 x 59.0 x 32.5 in Heat Exchanger:    68.8 x 149.9 x 120 cm 27.1 x 59.0 x 47.25 cm

AVAILABLE EQUIPMENT OPTIONS

None Available

Recently Viewed Items

10000LM45 Amplifier Research

Clear List