2500 Watt CW, 100 kHz - 250 MHz (w/ DCP, IEEE & RS-232 interfaces)

Home : Brand > Amplifier Research > 2500A250A

Amplifier Research 2500A250A 2500 Watt CW, 100 kHz - 250 MHz (w/ DCP, IEEE & RS-232 interfaces)

Product Status:

New / Refurbished

List Price:

$182,800

Our Price:

Request Quote

Rental Price:

Request Quote

Download Datasheet

SPECIFICATIONS

The Model 2500A250A is a self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull MOSFET circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability.

RATED OUTPUT POWER:

2500 watts, 100 kHz – 100 MHz
2500 – 1500 watts, 100 MHz – 250 MHz
(derating slope of 6.67 watts/MHz)

I NPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
POWER OUTPUT @ 1 dB COMPRESSION:
- 1800 watts, 100 kHz – 100 MHz
- 1800 – 800 watts, 100 MHz – 250 MHz
- (derating slop of 6.67 watts/MHz)
FREQUENCY RESPONSE: 100 kHz - 250 MHz instantaneously
GAIN (at maximum setting): 64 dB minimum
FLATNESS:
- ± 3.5 dB maximum
- ± 0.8 dB with internal leveling
GAIN ADJUSTMENT (continuous range): 20 dB minimum
I NPUT IMPEDANCE: 50 ohms, VSWR 1.5:1 maximum
OUTPUT IMPEDANCE: 50 ohms, VSWR 2.5:1 maximum

MISMATCH TOLERANCE: 100% rated power without foldback up to 6.0:1 mismatch above which may limit to 1250 watts reflected power, from 100 kHz to 100 MHz. Limited to 500 watts reflected power from 100 MHz to 250 MHz.

MODULATION CAPABILITY: Will faithfully reproduce AM, FM or Pulse modulation appearing on the input signal.

H ARMONIC DISTORTION: Minus 20 dBc maximum at 1500 watts

THIRD ORDER INTERCEPT POINT: 71 dBm typical

RF POWER DISPLAY: 0 - 4000 watts full scale

PULSE MODE GATING CHARACTERISTICS

Signal (into 50 ohms): + 2.0 to 6.0 VDC

Rise Time: 0.5 microseconds maximum

Fall Time: 0.5 microseconds

R F RISE/FALL TIME: 10 nanoseconds maximum

PRIMARY POWER

200-240 VAC Delta (4 wire) Wye compatible
346-416 VAC, Wye (5 wire)
400-480 VAC (4-wire), Wye compatible
47-63 Hz, 3 phase
(user must specify)
10,000 watts maximum at .95 P.F. typical

CONNECTORS

RF Input: See Model Configurations
RF Output: See Model Configurations
External Leveling Inputs: Type BNC female on front panel
Pulse Modulation Inputs: Type BNC female on front panel
Detected RF Output: Type BNC female on front panel
Remote Control: 24 pin female GPIB/IEEE-488 and 9-pin RS-232 connectors on rear panel
Remote Control (Fiber Optic): ST connector. Tx and Rx RS-232.
Safety Interlock: 15 pin female Type D on rear panel

FORWARD SAMPLE PORT: Type N female on rear panel

REVERSE SAMPLE PORT: Type N female on rear panel

IEEE-488 (GPIB) INTERFACE & RS-232: Allows control of all amplifier functions and monitoring of all status indications.

COOLING: Forced air (self contained fans)

WEIGHT (maximum): 227 kg (500 lb)

SIZE (W x H x D): 68.6 x 132.0 x 88.9 cm (27.0 x 52.0 x 35.0 in)

AVAILABLE EQUIPMENT OPTIONS

None Available