|
The Model 2500A225 is a self-contained, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth and high gain are required. The amplifier is air cooled using internal self-contained liquid cooling for high performance and reliability. -
RATED OUTPUT POWER: -
2500W, 10 kHz–50 MHz - 2500–1900W, 50 MHz–225 MHz (derating slope of 3.43W/MHz)
-
INPUT FOR RATED OUTPUT: 1.0 mW Max -
POWER OUTPUT FOR 1dB COMPRESSION: -
FREQUENCY RESPONSE: 10 Khz-225 MHz instantaneously -
GAIN (at max. setting): 64 dB min. -
FLATNESS: -
GAIN ADJUSTMENT (continuous range): 16 dB minimum -
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 max -
OUTPUT IMPEDANCE: 50 ohms nominal -
MISMATCH TOLERANCE: 100% rated power without foldback up to 6.0:1 mismatch, above which may limit to 1250w reflected power -
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or Pulse Modulation appearing on the input signal. -
HARMONIC DISTORTION: Minus 20 dBc maximum at 1600W -
RF POWER DISPLAY: 0–3000W full scale -
PULSE MODE GATING CHARACTERISTICS -
Signal (into 50 ohms): +2.0 to 6.0 VDC -
Rise Time: 0.5 microseconds maximum -
Fall time: 0.5 microseconds maximum -
PRIMARY POWER: 187-264 vac 3-Phase, 8000W max. -
CONNECTORS - RF Input: See Model Configurations
- RF Output: See Model Configurations
- Forward Sample: BNC Female on front panel
- Reverse Sample: BNC Female on front panel
- Remote Control: 24-pin Female GPIB/IEEE-488 and 9-pin RS232 on rear panel, USB and Ethernet
- Remote Control (fiber optic): ST Connector
- Safety interlock: 15 pin female Type D on rear panel
-
COOLING: Forced air, internal self-contained liquid -
WEIGHT (max.): 159 kg (350 lb) -
SIZE (WxHxD): 56.1 X 109.2 X 88.9 cm (22.1 X 43.0 X 35.0 in)
|
