|
The Model 10W1000C is a portable, self-contained, air-cooled, broadband, solid state amplifier designed for applications where instantaneous bandwidth and high gain are required.
-
RATED POWER OUTPUT: 10 watts minimum
-
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
-
POWER OUTPUT @ 3dB COMPRESSION
-
Nominal: 20 watts
-
Minimum: 10 watts
-
POWER OUTPUT @ 1dB COMPRESSION
-
Nominal: 17 watts
-
Minimum: 10 watts
-
FLATNESS
-
±1.0 dB typical
-
±1.5 dB maximum
-
FREQUENCY RESPONSE: 500 kHz-1000 MHz instantaneously
-
GAIN (at maximum setting): 40 dB minimum
-
GAIN ADJUSTMENT (Continuous Range): 20 dB minimum (4096 steps remote)
-
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
- OUTPUT IMPEDANCE: 50 ohms, nominal
- MISMATCH TOLERANCE * 100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
- MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
- HARMONIC DISTORTION: Minus 20 dBc maximum at 10 watts
- THIRD ORDER INTERCEPT POINT: 50 dBm typical
-
PRIMARY POWER (selected automatically)
-
90-132, 180-264 VAC
- 50/60 Hz, single phase
- 300 watts maximum
- REMOTE INTERFACES: IEEE-488, RS-232
- CONNECTORS
- RF: Type N female
- REMOTE CONTROL
- IEEE-488: 24 pin female
- RS-232: 9 pin Subminiature D (female)
- REMOTE INTERLOCK: 15 Pin Subminiature D
- COOLING: Forced air (self contained fans)
- WEIGHT: See Model Configurations
- SIZE (WxHxD): See Model Configurations
|
