|
The Model 10WD1000 is a portable, self-contained, air-cooled, broadband, solid state amplifier designed for applications where extensive bandwidth and high gain are required.
-
RATED OUTPUT POWER: 15 watts minimum
-
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
-
POWER OUTPUT @ 3dB COMPRESSION
-
Nominal: 19 watts
-
Minimum: 12.5 watts
-
POWER OUTPUT @ 1dB COMPRESSION
-
Nominal: 17watts
-
Minimum: 10 watts
-
FLATNESS
-
±1.0 dB typical
-
±1.5 dB maximum
-
FREQUENCY RESPONSE: DC-1000 MHz (In two bands selected automatically, manually or buss)
-
GAIN: 40 dB minimum
-
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
- OUTPUT IMPEDANCE: 50 ohms, nominal
-
MISMATCH TOLERANCE 100% of rated output power. Will operate without damage or oscillation or foldback with any magnitude and phase of source and load impedance.
- MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
-
HARMONIC DISTORTION: Minus 20 dBc maximum at 10 watts
-
THIRD ORDER INTERCEPT POINT: 50 dBm typical
-
PRIMARY POWER (selected automatically)
-
85 to 264 VAC
-
47 to 440 Hz
-
500 watts maximum
-
REMOTE INTERFACES: IEEE-488, RS-232
-
CONNECTORS
-
SAFETY INTERLOCK: 15 Pin Subminiature D
-
COOLING: Forced air (self contained fans)
-
WEIGHT: See Model Configurations
- SIZE (WxHxD): See Model Configurations
|
