|
The Model 1S4G11 is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required.
-
RATED POWER OUTPUT: 1 watt minimum
-
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
-
POWER OUTPUT @ 3dB COMPRESSION
-
Nominal: 1.3 watts
-
Minimum: 1 watt
-
POWER OUTPUT @ 1dB COMPRESSION
-
Nominal: 1 watt
-
Minimum: 0.7 watts
-
FLATNESS
-
±1.5 dB typical
-
±2.5 dB maximum
-
FREQUENCY RESPONSE: 4.0-10.6 GHz instantaneously
-
GAIN (at maximum setting): 30 dB minimum
-
GAIN ADJUSTMENT (Continuous Range): 10 dB minimum
-
INPUT IMPEDANCE: 50 ohms, VSWR 2.5:1 maximum
-
OUTPUT IMPEDANCE: 50 ohms, nominal
-
MISMATCH TOLERANCE* 100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
-
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
-
HARMONIC DISTORTION: Minus 20 dBc maximum at 0.8 watts
-
THIRD ORDER INTERCEPT POINT: 40 dBm typical
-
PRIMARY POWER (Selected Automatically)
-
90-132, 180-264 VAC
-
50/60 Hz, single phase
-
50 watts maximum
-
CONNECTORS: Type N female ( see Model Configuration)
-
COOLING: Forced air (self contained fans)
|
