2000 Watt CW, 2.5 - 7.5 GHz - Liberty Test Equipment

Home : Brand > Amplifier Research > 2000T2G8

Amplifier Research 2000T2G8 2000 Watt CW, 2.5 - 7.5 GHz

Product Status:

New / Refurbished

List Price:

$878,000

Our Price:

Request Quote

Rental Price:

Request Quote

Download Datasheet

SPECIFICATIONS

The Model 2000T2G8 is a self contained, forced air cooled, broadband traveling wave tube (TWT) microwave amplifier designed for applications where instantaneous bandwidth, high gain and high power output are required. Reliable TWT subsystems provide a conservative 2000 watts minimum at the amplifier output connector. Stated power specifications are at fundamental frequency.

The Model 2000T2G8 provides readily available RF power for a variety of applications in Test and Measurement, (including EMC RF susceptibility testing), Industrial and University Research and Development, and Service applications.

POWER (fundamental), CW, @ OUTPUT CONNECTOR
- Nominal: 2200 watts
- Minimum: 2000 watts
- Linear @ 1 dB Compression: 500 watts minimum
FLATNESS
- ±8 dB maximum, equalized for ±5 dB maximum at rated power
FREQUENCY RESPONSE: 2.5 – 7.5 GHz instantaneously
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
GAIN (at maximum setting): 63 dB minimum
GAIN ADJUSTMENT (continuous range): 35 dB minimum
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
OUTPUT IMPEDANCE: 50 ohms, VSWR 2.5:1 typical
MISMATCH TOLERANCE: Output power foldback protection at reflected power exceeding 400 watts. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off.
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal. AM peak envelope power limited to specified power.
NOISE POWER DENSITY
- Minus 85 dBm/Hz (maximum)
- Minus 95 dBm/Hz (typical)
HARMONIC DISTORTION
- Minus 15 dBc maximum, Minus 22 dBc typical, minus 20 dBc
- maximum when used with supplied external filter.
PRIMARY POWER: See Model Configuration
CONNECTORS
- RF input: Type N female on rear panel
- RF output: Type WRD-250D30 waveguide flange on rear panel
- RF output sample ports (forward and reflected): Type N female on rear panel
- GPIB: IEEE-488 female on rear panel
- Interlock: DB-15 female on rear
COOLING: Forced air (self contained fans), air entry and exit in rear.
WEIGHT: 909 kg (2000 lb)
SIZE (W x H x D):

Four Cabinets each

56 x 160 x 82.3 cm
22.1 x 63 x 32.4 in

AVAILABLE EQUIPMENT OPTIONS

None Available