Liberty Test   Call Us: 877-821-4811  
 
  Home | Product Categories | Brands | Doing Business | Current Promotions | Lab | Solutions | About | Contact Us
 
 
ALL BRANDS
ALL EQUIPMENT
FEATURED PRODUCTS
SPECIALS
                    
Home : Brand > Amplifier Research > 8000TP1G1z5
Amplifier Research 8000TP1G1z5 8000 Watt Pulse only, 1 - 1.5 GHz

8000 Watt Pulse only, 1 - 1.5 GHz

Product Status: New / Refurbished
List Price: $169,000
Our Price: Request Quote
Rental Price: Request Quote

Download project datasheet details pdf file  Download Datasheet
Click here to view enlarge image
SPECIFICATIONS

The Model 8000TP1G1z5 is a self contained, forced air cooled, broadband traveling wave tube (TWT) microwave amplifier designed for pulse applications at low duty factors where instantaneous bandwidth and high gain are required. A reliable TWT provides a conservative 8000 watts minimum peak RF pulse power at the amplifier output connector. Stated power specifications are at the fundamental frequency.
  • POWER (Fundamental), Peak Pulse, @ Output
    • Nominal:   10,000 watts
    • Minimum:   8000 watts
  • FLATNESS:   ±6 dB maximum
  • FREQUENCY RESPONSE:   1-1.5 GHz
  • INPUT FOR RATED OUTPUT:   1.0 milliwatt maximum
  • GAIN (at maximum setting):   69 dB minimum
  • GAIN ADJUSTMENT (continuous range):   35 dB minimum
  • INPUT IMPEDANCE:   50 ohms, VSWR 2.5:1 maximum
  • OUTPUT IMPEDANCE:   50 ohms, VSWR 2.5:1 typical
  • MISMATCH TOLERANCE:   Output VSWR protection using internal isolator. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off.
  • PULSE CAPABILITY
    • Pulse Width:   0.07 – 40 microseconds.
    • Pulse Rate (PRF):   100 kHz maximum
    • Duty Cycle:   1% maximum.
    • RF Rise and Fall:   30 ns max (10% to 90%).
    • Delay:   300 ns maximum from pulse input to RF 90%
    • Pulse Width Distortion:   ±30 ns maximum (50% points of output pulse width compared to 50% points of input pulse width)
    • Pulse Off Isolation:   80 dB minimum, 90 dB typical
    • Pulse Input:   TTL level, 50 ohm nominal termination
  • NOISE POWER DENSITY
    • (pulse on):   Minus 55 dBm/Hz maximum; Minus 65 dBm/Hz typical
    • (pulse off):   Minus 140 dBm/Hz (typical)
  • HARMONIC DISTORTION:   Minus 15 dBc maximum
  • PRIMARY POWER:   190-260 VAC, 50/60 Hz single phase, 1 KVA maximum
  • CONNECTORS
    • RF input:   Type N female on rear panel
    • RF output:   Type DIN 7-16 on rear panel
    • RF output forward and reflected sample ports:   Type N female on rear panel
    • Pulse input:   Type BNC female on rear panel
    • GPIB:   IEEE-488 female on rear panel
    • Interlock:   DB-15 female on rear panel
  • COOLING:   Forced air (self contained fans), air entry and exit in rear.
  • SIZE (W x H x D):   50.3 x 26 x 94 cm, 19.8 x 10.3 x 37 in
  • WEIGHT (approximate):   57 kg, 125 lbs
 
AVAILABLE EQUIPMENT OPTIONS
None Available

Recently Viewed Items
8000TP1G1z5
Amplifier Research
Clear List