Measuring Receiver 20 Hz to 26.5 GHz - Liberty Test Equipment

Home : Brand > Rohde and Schwarz > FSMR26

Rohde and Schwarz FSMR26 Measuring Receiver 20 Hz to 26.5 GHz

Product Status:

New / Refurbished

List Price:

Our Price:

Request Quote

Rental Price:

Request Quote

Download Datasheet

SPECIFICATIONS

The Measuring Receiver R&S^ŽFSMR is a one-box solution for calibrating RF-level and analog modulation parameters of signal generators as well as attenuation.High precision level calibrator

Modulation Analyzer for AM/FM/PM
Audio Analyzer with THD and SINAD
Support for NRP power sensors for absolute power measurements
High-performance spectrum analyzer
Wide level range +10 dBm to 130 dBm
Modulation analysis: Modulation depth, frequency and phase deviation
Audio analysis with automatically tuned THD and SINAD
FFT on the audio signal and on the demodulated signal
Audio spectrum and spectrum display of the demodulated signal
Time domain display of audio signal and demodulated signal
Low/high pass audio filters and demphasis
Separate audio input for calibration of audio signals
Fast RF counter with 0.1 Hz resolution
Spectrum analyzer functions as for the high performance Spectrum Analyzer R&S FSU
High immunity against drifting or unstable signals
Fully programmable via GPIB/LAN

Functions and properties tailored to the needs of calibration labs:

Very high level stability over time
Easy-to-use, with complete operation control from the R&S^ŽFSMR front panel
Traceable calibration
Documented calibration procedure
Specifications equal to or exceeding the HP 8902 with option 050

AVAILABLE EQUIPMENT OPTIONS

FS~K72

3GPP BTS/Node B FDD Application Firmware

FS~K73

3GPP HSPA+UE Application Firmware

FS~K74

3GPP HSDPA Base Transceiver Station (BTS) Application Firmware (FS-K72 required)

FS~K82

CDMA2000/IS-95 (cdmaOne)/ 1xEV-DV BTS Test Application Firmware

FSMR~B18

Removable Hard Disk

FSMR~B19

Second Hard Disk for FSMR-B18 (FSMR-B18 required)

FSMR~B2

YIG Preselection 3.6 GHz to 26 GHz

FSMR~B223

YIG Preselection with 20 dB preamplifier, 3.6 GHz to 26 GHz for FSMR 26 (FSU-B25 required

FSMR~B23

RF Preamplifier 3.6 GHz to 26 GHz for R&S FSMR 26

FSMR~B73

Vector signal analysis for FSMR

FSU~B24

Internal preamplifier 100 kHz to 50 GHz, 30 dB gain, for Spectrum Analyzers FSU26/43/46/50, Signal Analyzers FSQ26/40, Measuring Receivers FSMR26/50

FSU~B25

Electronic Attenuator, 0 dB to 30 dB, and 20 dB Preamplifier (3.6 GHz)

FSU~B4

Low-Aging OCXO

FSU~B9

Tracking generator 100 kHz to 3.6 GHz