Home : Brand > Wandel & Goltermann > PCM-4

Wandel & Goltermann PCM-4 PCM Channel Measuring Set
	Product Status: New / Refurbished List Price: $7,737 Our Price: Request Quote Rental Price: Request Quote Select One PCM-4|AA001127  PCM-4|AA001127  PCM-4|AA001541  PCM-4|AA001541  PCM-4|AA001701  PCM-4|AA001723  PCM-4|AA001723  PCM-4|AA001723  PCM-4|AB000336    Download Datasheet
SPECIFICATIONS
The Wandel and Goltermann PCM-4 PCM Channel Measuring Set is used for measurements on PCM coders/decorders between analog and digital interfaces.   This unit can handle practically all PCM multiplexer measurements and also measurements on the constituent subassemblies of digital switches. The set has four main subassemblies: a digital signal generator, a digital signal receiver, and analog generator and an analog receiver. The digital signal is processed with a high accuracy and measuring speed.

IN-STOCK EQUIPMENT

PCM-4

AVAILABLE EQUIPMENT OPTIONS

BN958/24

IEEE 488/IEC 625 Interface with IEEE 488 connector and K 420 connecting cable

BN984.00.05

Serial 64 kbit/s TTL input

BN984.00.06

Serial 64 kbit/s TTL output. Co- or contradirectional, depending on mode

BN984.00.07

Parallel 64 kbit/s TTL input

BN984.00.08

Parallel 64 kbit/s TTL output. Parallel 8 bit input/output with 8 kHz clock signal

BN984/00.01

Codirectional 64 kbit/s input

BN984/00.02

Codirectional 64 kbit/s output Electrical characteristics to ITU-T G.703

BN984/00.03

Contradirectional 64 kbit/s input

BN984/00.04

Contradirektionaler 64 kbit/s output Electrical characteristics to ITU-T G.703

BN984/00.09

64 kbit/s V.11 interface input/output via 15 way plug to ITU-T X.24

BN984/00.10

Transfer Loss Bridge: 600 ohm/900 ohm/CPLX (PCM-4 only)

BN984/00.11

Transfer Loss Bridge: 600 ohm/850 ohm/ CPLX (PCM-4 only)

BN984/00.14

120 kHz low pass filter for out-of-band noise suppression

BN984/00.16

Bridge impedance addition. Up to 4 additional customer specific CPLX impedances can be added to the bridge; selection only via IEC/IEEE interface

BN984/00.19

Analog signaling interface for measurement of signaling distortion and interference from signaling

BN984/00.31

Analog generator/receiver impedance modifications (replaces 850 ohm/900 ohm and CPLX)

BN984/00.32

Impedance modification (replaces 850 ohm or 900 ohm and CPLX)

BN984/00.33

2 wire termination modification (replaces 910 ohm ll 39 nF

BN984/00.34

Analog general output impedance modified to Z out ~ 0 ohm in place of complex impedance

BN984/00.35

Tolerance masks programmed to user specifications

BN984/00.41

Software retrofitted to the latest status for PCM-4 BN984/01

BN984/00.42

Software retrofitted to the latest status for PCM-4 BN984/02 and BN984/05

BN984/00.43

Software retrofitted to the latest status for PCM-4 BN984/03

Recently Viewed Items

PCM-4 Wandel & Goltermann

Clear List