|
The Tektronix TDS3014 oscilloscope is a graph-displaying device – it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.
The Tektronix TDS3014 oscilloscope's simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.
-
Automatic Waveform Measurements - Period, Frequency, +Width, -Width, Rise-time, Fall-time, +Duty Cycle, -Duty Cycle, +Overshoot, -Overshoot, High, Low, Max, Min, P-P, Amplitude, Mean, Cycle Mean, RMS, Cycle RMS, Burst Width.
-
Display any four measurements from any combination of waveforms
-
Centronics Port Standard on all Models for Quick, Convenient Hardcopies
-
Telecommunications Mask Testing (TMT)
-
Fast Fourier Transform (FFT) for Frequency and Harmonic Analysis Standard on 4 Channel Models
-
Extended Video Application Module
-
Support for Active Probes, Differential Probes and Current Probes that Provide Automatic Scaling and Units
|
