Home : Equipment > Amplifiers > 2000W1000A

Amplifier Research 2000W1000A 2000 Watt CW, 80 - 1000 MHz (w/ DCP, IEEE, RS-232 interfaces)
	Product Status: New / Refurbished List Price: $414,600 Our Price: Request Quote Rental Price: Request Quote   Download Datasheet
SPECIFICATIONS
The Model 2000W1000A is a self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. RATED OUTPUT POWER:   1900 watts minimum INPUT FOR RATED OUTPUT:   1.0 milliwatts maximum POWER OUTPUT @ 3dB compression Nominal:   2100 watts Minimum:   1650 watts POWER OUTPUT @ 1dB Nominal:   1750 watts Minimum:   1200 watts FLATNESS: ±2.5 dB maximum ±0.8 dB with internal leveling FREQUENCY RESPONSE:   80-1000 MHz instantaneously GAIN (at maximum setting):   63 dB minimum GAIN ADJUSTMENT (continuous range):   18 dB minimum INPUT IMPEDANCE:   50 ohms, VSWR 2.0:1 maximum OUTPUT IMPEDANCE:   50 ohms nominal MISMATCH TOLERANCE    100% of rated power without foldback up to 6.0:1 mismatch above which may limit to 950 watts reflected power. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. MODULATION CAPABILITY:   Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal HARMONIC DISTORTION:   Minus 20 dBc maximum at 1500 watts THIRD ORDER INTERCEPT POINT:   70 dBm typical RF POWER DISPLAY:   0-2500 watts PRIMARY POWER (specify voltage) 200-250 VAC, Delta Connected (4 wire) 360-435 VAC, Wye Connected (5 wire) 50/60 Hz, 3 phase 25 kVA Maximum CONNECTORS RF input:   See Model Configurations RF output:   Type 1 5/8 EIA on rear External leveling inputs:   Type BNC female on front panel Pulse modulation input:   Type BNC female on front panel Detected RF output:   Type BNC female on front panel Safety interlock:   15 pin female subminiature D on rear panel Remote computer interface:   24 Pin female IEEE-488.2 (GPIB) connector on rear panel Remote computer interface (fiber optic):   ST Conn Tx and Rx RS-232 COOLING:   Forced air (self contained fans) Enters front and bottom WEIGHT (approximate):   839 kg (1850 lb) SIZE (WxHxD) (3 cabinets):   201 x 158 x 160 cm (79 x 62 x 63 in)

AVAILABLE EQUIPMENT OPTIONS

None Available

Recently Viewed Items

2000W1000A Amplifier Research

Clear List