Liberty Test   Call Us: 877-821-4811  
 
  Home | Product Categories | Brands | Doing Business | Current Promotions | Lab | Solutions | About | Contact Us
 
 
ALL BRANDS
ALL EQUIPMENT
FEATURED PRODUCTS
SPECIALS
                    
Home : Equipment > Amplifiers > 2000W1000A
Amplifier Research 2000W1000A 2000 Watt CW, 80 - 1000 MHz (w/ DCP, IEEE, RS-232 interfaces)

2000 Watt CW, 80 - 1000 MHz (w/ DCP, IEEE, RS-232 interfaces)

Product Status: New / Refurbished
List Price: $414,600
Our Price: Request Quote
Rental Price: Request Quote

Download project datasheet details pdf file  Download Datasheet
Click here to view enlarge image
SPECIFICATIONS

The Model 2000W1000A is a self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability.
  • RATED OUTPUT POWER:   1900 watts minimum
  • INPUT FOR RATED OUTPUT:   1.0 milliwatts maximum
  • POWER OUTPUT @ 3dB compression
    • Nominal:   2100 watts
    • Minimum:   1650 watts
  • POWER OUTPUT @ 1dB
    • Nominal:   1750 watts
    • Minimum:   1200 watts
  • FLATNESS:
    • ±2.5 dB maximum
    • ±0.8 dB with internal leveling
  • FREQUENCY RESPONSE:   80-1000 MHz instantaneously
  • GAIN (at maximum setting):   63 dB minimum
  • GAIN ADJUSTMENT (continuous range):   18 dB minimum
  • INPUT IMPEDANCE:   50 ohms, VSWR 2.0:1 maximum
  • OUTPUT IMPEDANCE:   50 ohms nominal
  • MISMATCH TOLERANCE    100% of rated power without foldback up to 6.0:1 mismatch above which may limit to 950 watts reflected power. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
  • MODULATION CAPABILITY:   Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
  • HARMONIC DISTORTION:   Minus 20 dBc maximum at 1500 watts
  • THIRD ORDER INTERCEPT POINT:   70 dBm typical
  • RF POWER DISPLAY:   0-2500 watts
  • PRIMARY POWER (specify voltage)
    • 200-250 VAC, Delta Connected (4 wire)
    • 360-435 VAC, Wye Connected (5 wire)
    • 50/60 Hz, 3 phase
    • 25 kVA Maximum
  • CONNECTORS
    • RF input:   See Model Configurations
    • RF output:   Type 1 5/8 EIA on rear
    • External leveling inputs:   Type BNC female on front panel
    • Pulse modulation input:   Type BNC female on front panel
    • Detected RF output:   Type BNC female on front panel
    • Safety interlock:   15 pin female subminiature D on rear panel
    • Remote computer interface:   24 Pin female IEEE-488.2 (GPIB) connector on rear panel
    • Remote computer interface (fiber optic):   ST Conn Tx and Rx RS-232
  • COOLING:   Forced air (self contained fans) Enters front and bottom
  • WEIGHT (approximate):   839 kg (1850 lb)
  • SIZE (WxHxD) (3 cabinets):   201 x 158 x 160 cm (79 x 62 x 63 in)
AVAILABLE EQUIPMENT OPTIONS
None Available

Recently Viewed Items
2000W1000A
Amplifier Research
Clear List