Liberty Test   Call Us: 877-821-4811  
 
  Home | Product Categories | Brands | Doing Business | Current Promotions | Lab | Solutions | About | Contact Us
 
 
ALL BRANDS
ALL EQUIPMENT
FEATURED PRODUCTS
SPECIALS
                    
Home : Equipment > Amplifiers > 500W1000A
Amplifier Research 500W1000A 500 Watt CW, 80 - 1000 MHz (w/ DCP, IEEE & RS-232 interfaces)

500 Watt CW, 80 - 1000 MHz (w/ DCP, IEEE & RS-232 interfaces)

Product Status: New / Refurbished
List Price: $98,000
Our Price: Request Quote
Rental Price: Request Quote

Download project datasheet details pdf file  Download Datasheet
Click here to view enlarge image
SPECIFICATIONS

The Model 500W1000A is a self-contained, air-cooled, broadband , completely solid-state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability.
  • RATED POWER OUTPUT:   525 watts minimum
  • INPUT FOR RATED OUTPUT:   1.0 milliwatt maximum
  • POWER OUTPUT @ 3dB COMPRESSION
    • Nominal:   612 watts
    • Minimum:   450 watts
  • POWER OUTPUT @ 1dB COMPRESSION
    • Nominal:   515 watts
    • Minimum:   350 watts
  • FLATNESS
    • ± 2.0 dB maximum
    • ± 0.8 dB with internal leveling
  • FREQUENCY RESPONSE:   80–1000 MHz instantaneously
  • GAIN (at maximum setting):   57 dB minimum
  • GAIN ADJUSTMENT (continuous range):   18 dB minimum
  • INPUT IMPEDANCE:   50 ohms, VSWR 2.0:1 maximum
  • OUTPUT IMPEDANCE:   50 ohms nominal
  • MISMATCH TOLERANCE   100% of rated power without foldback up to 6.0:1 mismatch above which may limit to 250 watts reflected power. Will operate without damage or oscillation with any magnitude and phase of source and load impedance 
  • MODULATION CAPABILITY:   Will faithfully reproduce AM, FM, or Pulse modulation appearing on the input signal.
  • HARMONIC DISTORTION:   Minus 20 dBc maximum at 400 watts
  • THIRD ORDER INTERCEPT POINT:   63 dBm typical
  • RF POWER METER:   600 watts full scale
  • PRIMARY POWER (specify)
    • 200 - 250 VAC, 50/60 Hz, single phase
    • 6500 VA maximum
  • CONNECTORS
    • RF Input:   See Model Configuration
    • RF Output:   See Model Configuration
    • External Leveling Inputs:   Type BNC female on front panel
    • Pulse Modulation Input:   Type BNC female on front panel
    • Detected RF Output:   Type BNC female on front panel
    • Safety Interlock:   15 pin subminiature D on rear panel
    • Remote Computer Interface:   24 Pin female IEEE-488 (GPIB) and RS-232 connector on rear panel
    • Remote Computer Interface (fiber-optic):   ST Conn Tx and Rx RS-232
  • COOLING:   Forced air (self contained fans) See Model Configuration
  • WEIGHT (approximate):   174 kg (383 lb)
  • SIZE (W x H x D):   56.1 x 149.9 x 58.4 cm (22.1 x 59.0 x 23.0 in)

AVAILABLE EQUIPMENT OPTIONS
None Available

Recently Viewed Items
500W1000A
Amplifier Research
Clear List
 
Teledyne LeCroy Krohn-Hite Keysight Technologies Keithley Spanawave / Giga-tronics