|
The Model 50W1000B is a portable, self-contained, air-cooled, broadband, solid state amplifier designed for applications where instantaneous bandwidth and high gain are required.
-
RATED OUTPUT POWER: 50 watts minimum
-
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
-
POWER OUTPUT @ 3dB COMPRESSION
-
Nominal: 70 watts
-
Minimum: 50 watts
-
POWER OUTPUT @ 1dB COMPRESSION
-
Nominal: 55 watts
-
Minimum: 40 watts
-
FLATNESS
-
±1.0 dB typical
-
±1.5 dB maximum
-
FREQUENCY RESPONSE: 1-1000 MHz instantaneously
-
GAIN (at maximum setting): 47 dB minimum
-
GAIN ADJUSTMENT (Continuous Range): 20 dB minimum (4096 steps remote)
-
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
- OUTPUT IMPEDANCE: 50 ohms, nominal
-
MISMATCH TOLERANCE 100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
-
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
-
HARMONIC DISTORTION: Minus 20 dBc maximum at 50 watts
-
THIRD ORDER INTERCEPT POINT: 57 dBm typical
-
PRIMARY POWER (selected automatically)
-
90-132, 180-264 VAC
-
50/60 Hz, single phase
-
600 watts maximum
-
REMOTE INTERFACES: IEEE-488, RS-232
-
CONNECTORS
-
RF: Type N female
-
REMOTE CONTROL
-
REMOTE INTERLOCK: 15 Pin Subminiature D
-
COOLING: Forced air (self contained fans)
-
WEIGHT: See Model Configurations
-
SIZE (WxHxD): See Model Configurations
|
