800 Watt CW, 0.8 - 3 GHz (w/ DCP, IEEE & RS-232 interfaces) - Amplifiers

Amplifier Research 800S1G3 800 Watt CW, 0.8 - 3 GHz (w/ DCP, IEEE & RS-232 interfaces)

Product Status:

New / Refurbished

List Price:

$596,100

Our Price:

Request Quote

Rental Price:

Request Quote

Download Datasheet

SPECIFICATIONS

The Model 800S1G3 is a self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Quadrature coupled circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Model 800S1G3, when used with a sweep generator, will provide a minimum of 800 watts of RF power.

RATED OUTPUT POWER
- 0.8 – 1.0 GHz: 750 watts minimum
- 1.0 – 3.0 GHz: 800 watts minimum
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
POWER OUTPUT @ 3 dB COMPRESSION
- Nominal: 825 watts
- Minimum: 675 watts
POWER OUTPUT @ 1dB COMPRESSION
- Nominal: 780 watts
- Minimum: 600 watts
FLATNESS
- ±3.5 dB maximum
- ±1.0 dB with internal leveling
FREQUENCY RESPONSE: 0.8 - 4.2 GHz instantaneously
GAIN (at maximum setting): 59 dB minimum
GAIN ADJUSTMENT: 15 dB minimum
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
OUTPUT IMPEDANCE: 50 ohms nominal
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
HARMONIC DISTORTION: Minus 20 dBc maximum at 675 watts
THIRD ORDER INTERCEPT POINT: 68 dBm typical
RF POWER DISPLAY: Digital, forward and reflected
PRIMARY POWER
- 200-240 VAC
- 50/60 Hz, single phase
- 9000 watts
CONNECTORS
- RF input: Type N female on front panel
- RF output : Type 7/8 EIA on rear panel
- External leveling inputs: Type BNC female on front panel
- Pulse modulation input: Type BNC female on front panel
- Detected RF output: Type BNC female on front panel
- Safety Interlock: 15 pin female subminiature D on rear panel
- Remote computer interface: 24 pin female IEEE-488.2 (GPIB) connector on rear panel
- Remote computer interface (fiber optic): ST Conn Tx and Rx RS-232
IEEE-488 (GPIB) INTERFACE & RS-232: Allows control and monitoring of all front panel controls except keylock position control
COOLING: Forced air (self contained fans) enters front and bottom
WEIGHT (approximate): 771 kg (1700 lbs)
SIZE (W x H x D) (4 cabinets)
- Cabinet 1 (3 cabinets): 56.1 x 109 x 67.1 cm (22.1 x 43.0 x 26.4 in)
- Cabinet 2 (1 cabinet): 56.1 x 152.4 x 67.1 cm (22.1 x 60.0 x 26.4 in)

AVAILABLE EQUIPMENT OPTIONS

None Available