|
The Model 20S4G11A is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required.
-
RATED POWER OUTPUT: 20 watts minimum
-
POWER OUTPUT @ 3dB COMPRESSION
-
Nominal: 25 watts
-
Minimum: 20 watts
-
POWER OUTPUT @ 1dB COMPRESSION
-
Nominal: 22 watts
-
Minimum: 18 watts
-
FLATNESS
- ±2.0 dB typical
- ±3.0 dB maximum
-
FREQUENCY RESPONSE: 4.0 – 10.6 GHz instantaneously
-
INPUT FOR RATE OUTPUT: 1.0 milliwatt maximum, 0 dBm
-
GAIN (at maximum setting): 43 dB minimum
-
GAIN ADJUSTMENT (Continuous Range): 10 dB minimum
-
INPUT IMPEDANCE: 50 ohms, VSWR 2.5:1 maximum
-
OUTPUT IMPEDANCE: 50 ohms, nominal
-
MISMATCH TOLERANCE 100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
-
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
-
HARMONIC DISTORTION: Minus 20 dBc maximum at 20 watts
-
THIRD ORDER INTERCEPT POINT: 52 dBm typical
-
PRIMARY POWER (selected automatically)
-
90-132, 180-264 VAC
-
50/60 Hz, single phase
-
<550 watts maximum
-
CONNECTORS
-
SAFETY INTERLOCK: 15 Pin Subminiature D
-
COOLING: Forced air (self contained fans)
|
