Liberty Test   Call Us: 877-821-4811  
 
  Home | Product Categories | Brands | Doing Business | Current Promotions | Lab | Solutions | About | Contact Us
 
 
ALL BRANDS
ALL EQUIPMENT
FEATURED PRODUCTS
SPECIALS
                    
Home : Equipment > Amplifiers > 2000TP8G18
Amplifier Research 2000TP8G18 2000 Watt Pulse only, 7.5 - 18 GHz

2000 Watt Pulse only, 7.5 - 18 GHz

Product Status: New / Refurbished
List Price: $256,100
Our Price: Request Quote
Rental Price: Request Quote

Download project datasheet details pdf file  Download Datasheet
Click here to view enlarge image
SPECIFICATIONS

The Model 2000TP8G18 is a self contained, forced air cooled, broadband traveling wave tube (TWT) microwave amplifier designed for pulse applications at low to moderate duty factors where instantaneous bandwidth, reduced harmonics and high gain are required. A reliable TWT subsystem provides a conservative 2000 watts minimum peak RF pulse power at the amplifier output connector. Stated power specifications are at the fundamental frequency.
  • POWER (fundamental), PEAK PULSE, @ OUTPUT CONNECTOR
    • Nominal:   2500 watts
    • Minimum:   2000 watts
  • FLATNESS:   ±8 dB maximum, equalized for ±3 dB maximum at rated power
  • FREQUENCY RESPONSE:   7.5 – 18 GHz instantaneously
  • INPUT FOR RATED OUTPUT:   1.0 milliwatt maximum
  • GAIN (at maximum setting):   63 dB minimum
  • GAIN ADJUSTMENT (continuous range):   35 dB minimum
  • INPUT IMPEDANCE:   50 ohms, VSWR 2.5:1 maximum
  • OUTPUT IMPEDANCE:   50 ohms, VSWR 2.5:1 typical
  • MISMATCH TOLERANCE:   Output pulse width foldback protection at peak reflected power exceeding 1000 watts. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off.
  • PULSE CAPABILITY
    • Pulse Width:   0.07 – 30 microseconds.
    • Pulse Rate (PRF):   100kHz maximum
    • Duty Cycle:   4% maximum
    • RF Rise and Fall:   30 ns max (10% to 90%)
    • Delay:   300 ns maximum from pulse input to RF 90%
    • Pulse Width Distortion:   ±30 ns max (50% point of output pulse width compared to 50% points of input pulse width).
    • Pulse Off Isolation:   80 dB minimum, 90 dB typical
  • NOISE POWER DENSITY
    • (pulse on):   Minus 55 dBm/Hz (maximum), minus 58 dBm/Hz(typical)
    • (pulse off):   Minus 140 dBm/Hz (typical)
  • HARMONIC DISTORTION:   Minus 18 dBc maximum, Minus 20 dBc typical
  • PRIMARY POWER
    • 190-260 VAC, single phase
    • 50/60 Hz
    • 3 KVA maximum
  • CONNECTORS
    • RF input:   Type N female on rear panel
    • RF output:   Type WRD 750D24 waveguide flange on rear panel
    • RF output sample port:   Type N female on rear panel
    • Pulse input:   Type BNC female on rear panel
    • GPIB:   IEEE-488 female on rear panel
    • Interlock:   DB-15 female on rear panel
  • COOLING:   Forced air (self contained fans), air entry and exit in rear.
AVAILABLE EQUIPMENT OPTIONS
None Available

Recently Viewed Items
2000TP8G18
Amplifier Research
Clear List