|
The Model 300TR2z5G7z5 is a self contained, forced air cooled, broadband traveling wave tube (TWT) microwave amplifier designed for applications where instantaneous bandwidth and high gain are required. A reliable TWT provides a conservative 300 watts minimum at the amplifier output connector. Stated power specifications are at the fundamental frequency.
-
POWER (fundamental), CW @ OUTPUT FLANGE
-
Nominal: 350 watts
-
Minimum: 300 watts
-
FLATNESS: ±12 dB maximum
-
FREQUENCY RESPONSE: 2.5-7.5 GHz instantaneously
-
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
-
GAIN (at maximum setting): 55 dB minimum
-
GAIN ADJUSTMENT (continuous range): 35 dB minimum
-
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
-
OUTPUT IMPEDANCE: 50 ohms, VSWR 2.5:1 typical
-
MISMATCH TOLERANCE: Output power fold back protection at reflected power exceeding 60 watts. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off.
-
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal. AM peak envelope power limited to specified power.
-
NOISE POWER DENSITY: Minus 85 dBm/Hz maximum, Minus 90 dBm/Hz typical
-
HARMONIC DISTORTION: Minus 3 dBc maximum, minus 4.5 dBc typical
-
PRIMARY POWER: 190-260 VAC, 50/60 Hz single phase, 3 KVA maximum
-
CONNECTORS
-
RF input: Type N female on rear panel
-
RF output: Type N female on rear panel
-
RF output sample port: Type N female on rear panel
-
GPIB: IEEE-488 (f) on rear panel
-
Interlock: DB-15 (f) on rear panel
-
COOLING: Forced air (self contained fans), air entry and exit in rear.
-
SIZE (W x H x D): 48.3 x 26.7 (6U) x 68.6 cm, 19 x 10.5 (6U) x 27 in
-
WEIGHT (approximate): 41 kg, 90 lb
|
