2000 Watt Pulse only, 8 - 12 GHz - Liberty Test Equipment

Home : Brand > Amplifier Research > 2000TP8G12

Amplifier Research 2000TP8G12 2000 Watt Pulse only, 8 - 12 GHz

Product Status:

New / Refurbished

List Price:

$143,100

Our Price:

Request Quote

Rental Price:

Request Quote

Download Datasheet

SPECIFICATIONS

The Model 2000TP8G12 is a self contained, forced air cooled, broadband traveling wave tube (TWT) microwave amplifier designed for pulse applications at low to moderate duty factors where instantaneous bandwidth and high gain are required. A reliable TWT provides a conservative 2000 watts minimum peak RF pulse power at the amplifier output connector. Stated power specifications are at the fundamental frequency.

POWER (fundamental), PEAK PULSE, @ OUTPUT CONNECTOR
- Nominal: 2500 watts
- Minimum: 2000 watts
FLATNESS: ±13 dB maximum, equalized for ±3dB maximum at rated power
FREQUENCY RESPONSE: 8.2 – 12.4 GHz instantaneously
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
GAIN (at maximum setting): 63 dB minimum
GAIN ADJUSTMENT (continuous range): 35 dB minimum
INPUT IMPEDANCE: 50 ohms, VSWR 2.5:1 maximum
OUTPUT IMPEDANCE: 50 ohms, VSWR 2.5:1 typical
MISMATCH TOLERANCE: Output pulse width foldback protection at peak reflected power exceeding 1000 watts. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off.
PULSE CAPABILITY
- Pulse Width: 0.07 – 30 microseconds.
- Pulse Rate (PRF): 100kHz maximum.
- Duty Cycle: 4% maximum.
- RF Rise and Fall: 30 ns max (10% to 90%).
- Delay: 300 ns maximum from pulse input to RF 90%
- Pulse Width Distortion: ±30ns max (50% point of output pulse width compared to 50% points of input pulse width).
- Pulse Off Isolation: 80dB minimum, 90dB typical
NOISE POWER DENSITY
- (pulse on): Minus 70 dBm/Hz (maximum), minus 75dBm/Hz (typical)
- (pulse off): Minus 140 dBm/Hz (typical)
HARMONIC DISTORTION: Minus 8dBc maximum, Minus 10dBc typical
PRIMARY POWER:
- 190 – 260VAC, single phase
- 50/60 Hz
- 2.0 KVA maximum
CONNECTORS
- RF input: Type N female on rear panel
- RF output: Type WRD 750D24 waveguide flange
- RF output sample port: Type N female
- Pulse input: Type BNC female on rear panel
- GPIB: IEEE-488 female on rear panel
- Interlock: DB-15 female on rear panel
COOLING: Forced air (self contained fans), air entry and exit in rear.
WEIGHT: 68 kg (150 lb)
SIZE (WxHxD):
- 50.3 x 31.1 x 77.5 cm
- 19.8 x 12.25 x 30.5 in

AVAILABLE EQUIPMENT OPTIONS

None Available