|
The Model 150A220 is a completely solid-state, linear broadband amplifier for laboratory applications requiring instantaneous bandwidth, high gain and moderate power.
-
RATED OUTPUT POWER: 150 watts
-
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
-
POWER OUTPUT @ 3dB COMPRESSION
-
Typical: 250 watts
-
Minimum: 150 watts
-
POWER OUTPUT @ 1dB COMPRESSION
-
Typical: 200 watts
-
Minimum: 150 watts
-
FREQUENCY RESPONSE: 10 KHz - 220 MHz instantaneously
-
GAIN (at maximum setting): 53 dB minimum
-
FLATNESS: ±1.5 dB max.
-
GAIN ADJUSTMENT (continuous range): 18 dB minimum
-
INPUT IMPEDANCE: 50 ohms, VSWR 1.5:1 max.
- OUTPUT IMPEDANCE: 50 ohms nominal
-
MISMATCH TOLERANCE 100% of rated power without damage, foldback, shutdown or oscillation with any magnitude and phase of source and load impedance at rated output power.
-
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
-
HARMONIC DISTORTION
- THIRD ORDER INTERCEPT POINT: 60 dBm, typical
- RF RISE TIME (10% to 90%): 3 nanoseconds maximum
-
PRIMARY POWER
-
115–230 VAC
- 50/60 Hz, single phase
- 1500 watts maximum
- CONNECTORS
- RF input: See Model Configurations
- RF output: See Model Configurations
- Remote control: 25 Pin subminiature D
- COOLING: Forced Air (internal fans)
|
