Liberty Test   Call Us: 877-821-4811  
 
  Home | Product Categories | Brands | Doing Business | Current Promotions | Lab | Solutions | About | Contact Us
 
 
ALL BRANDS
ALL EQUIPMENT
FEATURED PRODUCTS
SPECIALS
                    
Home : Equipment > Amplifiers > 200T26z5G40
Amplifier Research 200T26z5G40 200 Watt CW, 26.5 - 40 GHz

200 Watt CW, 26.5 - 40 GHz

Product Status: New / Refurbished
List Price: $637,500
Our Price: Request Quote
Rental Price: Request Quote

Download project datasheet details pdf file  Download Datasheet
Click here to view enlarge image
SPECIFICATIONS

The Model 200T26z5G40 is a self contained, forced air cooled, broadband traveling wave tube (TWT) microwave amplifier designed for applications where wide instantaneous bandwidth, high gain and moderate power output are required. A reliable TWT subsystem provides a conservative 200 watts minimum at the amplifier output connector. Stated power specifications are at the fundamental frequency.
  • POWER (fundamental), CW, @ OUTPUT CONNECTOR
    • Nominal:    225 watts
    • Minimum:   200 watts
    • Linear @ 1 dB Compression:   50 watts minimum
  • FLATNESS:   ± 10 dB maximum
  • FREQUENCY RESPONSE:   26.5 – 40 GHz instantaneously
  • INPUT FOR RATED OUTPUT:   1.0 milliwatt maximum
  • GAIN (at maximum setting):   53 dB minimum
  • GAIN ADJUSTMENT (continuous range):   35 dB minimum
  • INPUT IMPEDANCE:   50 ohms, VSWR 2.0:1 maximum
  • OUTPUT IMPEDANCE:   50 ohms, VSWR 2.5:1 typical
  • MISMATCH TOLERANCE:   Output power foldback protection at reflected power exceeding 40 watts. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off.
  • MODULATION CAPABILITY:   Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal. AM peak envelope power limited to specified power.
  • VIDEO PULSE CAPABILITY
    • Pulse Width:   0.1 microseconds min
    • Pulse Rate (PRF):   10 kHz max
    • Duty Cycle:   Some restrictions apply. Contact AR with application requirements.
    • RF Rise and Fall:   100 ns max (10% to 90%)
    • Delay:   500 ns max from pulse input to RF90%
    • Pulse width distortion:   200 ns max (50% points of output pulse width compared to 50% points of input pulse width)
    • Noise Power Density, (pulse off):    Minus 140 dBm/Hz (typical)
    • Pulse Off Isolation:    80 dB minimum, 90 dB typical
    • Pulse Input:   TTL Level, 50 Ohm nominal termination, high level enables RF when video pulsing mode is selected.
  • NOISE POWER DENSITY  
    • Minus 70 dBm/Hz (maximum)
    • Minus 75 dBm/Hz (typical)
  • HARMONIC DISTORTION  
    • Minus 20 dBc maximum
    • Minus 30 dBc typical
  • PRIMARY POWER:   190-260 VAC, 50/60 Hz single phase, 3 kVA maximum
  • CONNECTORS
    • RF input:   Type K female on rear panel
    • RF output:   Type WR-28 waveguide flange on rear panel
    • RF output sample ports:   Type K female on rear panel
    • GPIB:   IEEE-488 on rear panel
    • Interlock:   DB-15 female on rear panel
    • Video:   BNC female on rear panel
  • COOLING:   Forced air (self contained fans), air entry and exit in rear
  • WEIGHT(approximate):   91 kg, 200 lbs
  • SIZE (W x H x D):   50.3 x 43 x 81 cm, 19.8 x 17 x 32 in.
AVAILABLE EQUIPMENT OPTIONS
None Available

Recently Viewed Items
200T26z5G40
Amplifier Research
Clear List