I/Q Modulation Generator AMIQ and Simulation Software WinIQSIM open up new dimensions for the generation of I/Q signals. AMIQ is a dual-channel modulation generator that has consequently been designed for use as an I/Q source. It is programmed and set with Software WinIQSIM. Alternatively, AMIQ can be operated from an SMIQ Vector Signal Generator.

Each channel can store 4,000,000 samples. Even at high symbol rates, sequences of sufficient length can thus be generated. With clock frequencies of up to 100 Msample/s and a high amplitude resolution of 14 bits, AMIQ is the ideal source for any signal in the world of digital modulation.

An automatic amplitude/offset alignment, as well as fine adjustment of the skew, provide excellent symmetry of the two channels which previously was extremely difficult to attain with the dual-channel ARB generators. The error vector can thus be minimized.

A typical application of AMIQ and WinIQSIM is not only to drive the I/Q inputs of a vector signal generator. This combination is also ideal for direct applications in the baseband, e.g. for testing I/Q modulators/demodulators.

• 14-Bit Resolution (16-Bit with AMIQ-B3)
• 4,000,000/16,000,000 Samples Memory Depth
• 100 MHz Sample Rate
• Integrated Hard Disk and Floppy Disk Drive
• Optional BER Measurement
• Optional Differential Outputs Optional Digital Output