|
The AP-1M Adapter provides a high impedance (1 M Ω) interface for use on the WaveMaster family of products (DSO, DDA, SDA). The Adapter presents a high impedance path (instead of the 50 Ω WaveMaster input impedance) and allows you to measure higher voltage signals while also expanding the full-scale range capability of measurement.
The specifications pertain only to the AP-1M Adapter itself. You can achieve even higher full-scale ranges and offset ranges with the overall signal measurement chain (WaveMaster family product + AP-1M Adapter + Probe), depending on the probe used. The AP-1M Adapter is supplied with a PP005A passive probe, but it is suitable for use with other probe types, including current probes, which require a 1 M Ω path. The AP-1M also serves as a ProLink-to-ProBus adapter.
-
Bandwidth: 500 MHz typical, 350 MHz guaranteed
-
Input Impedance: 1 M Ω
-
Full-scale Range: ±8 V pk (±80 V pk with PP005A probe)
-
Offset Range (12-bit resolution):
±2.5 V pk below 200 mV/div (±25 V pk below 2 V/div with PP005A probe);
±50 V pk at and above 200 mV/div (±500 V pk at and above 20 V/div with PP005A probe)
-
Max. Withstand Voltage: ±150 V pk Cat I
-
Input Capacitance: 20 pF ±2 pF With PP005A: 11 pF at probe tip
-
Coupling: DC, AC (cutoff < 10 Hz)
-
Gain accuracy: ±3% system accuracy with AP-1M Adapter used with WaveMaster family products
-
Offset Accuracy: ±(3% of full scale + 1.5% of offset value + 2 mV)
-
Meets or exceeds Environmental Specifications (Operating Temperature: 5 °C to 40 °C, etc.) of WaveMaster family products.
-
Certification: CE Approved, Conforms to EN 61010-1
(Safety) and EN 61326-1 (EMC)
|
