|
The Agilent E2308A is a general purpose temperature probe. The thermistor (5 k ohm at 25 degrees C) is encapsulated in a stainless steel case and typically used for liquid temperature measurements.
The Agilent E2308A is compatible with the Agilent 3458A, 34410A and 34411A multimeter. It can also be used with the 34420A, but doing so requires the probe to be rewired onto the Agilent 34104A Low Thermal Input Connector. The E2308A can also be used with the 34401A, however, it requires an external program to convert the resistance measurements to temperature.
- Temperature range: -80 degrees C to 150 degrees C (-112 degrees F to 302 degrees F)
- Maximum temperature: 150 degrees C (302 degrees F)
- Accuracy: Typically less than 1 degree C (2 degrees F). This varies with instrument and temperature range.
- Time constant: 3 seconds (typical) from air to still water
- Dissipation constant: 5.7 mW/degree C in still water
- Stainless steel probe dimensions: 1.5 inches long x 0.125 inches in diameter
- Length: 36 inch leads
- Termination: 3/4 inch dual banana plugs
|
