|
The Model 150S4G11 is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. The Model 150S4G11, when used with a sweep generator, will provide a minimum of 150 watts of RF power instantaneously from 4 to 10.6 GHz. -
RATED POWER OUTPUT: 150 watts minimum -
POWER OUTPUT @ 3dB COMPRESSION -
Nominal: 155 watts -
Minimum: 145 watts -
POWER OUTPUT @ 1dB COMPRESSION -
Nominal: 145 watts -
Minimum: 135 watts -
FLATNESS -
±2.5 dB typical -
±3.5 dB maximum -
FREQUENCY RESPONSE: 4.0–10.6 GHz instantaneously -
INPUT FOR RATE OUTPUT: 1.0 milliwatt maximum, 0 dBm -
GAIN (at maximum setting): 51.8 dB minimum -
GAIN ADJUSTMENT (Continuous Range): 10 dB minimum -
INPUT IMPEDANCE: 50 ohms, VSWR 2.5:1 maximum -
OUTPUT IMPEDANCE: 50 ohms, nominal - MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
-
HARMONIC DISTORTION: Minus 20 dBc maximum at 150 watts -
THIRD ORDER INTERCEPT POINT: 59 dBm typical -
RF POWER DISPLAY: Digital, forward, and reflected -
PRIMARY POWER (selected automatically) -
90-132, 180-264 VAC -
50/60 Hz, single phase -
<4500 watts maximum -
CONNECTORS -
RF Input: See Model Configurations -
RF Output: Type N female on rear panel -
External Leveling Inputs: Type BNC female on front panel -
Pulse Modulation Input: Type BNC female on front panel -
Detected RF Output: Type BNC female on front panel -
REMOTE INTERFACES -
SAFETY INTERLOCK: 15 Pin Subminiature D -
COOLING: Forced air (self contained fans) -
WEIGHT (approximate): 345 kg (760 lbs) -
SIZE (W x H x D): 112.3 x 152.4 x 67.3cm (44.2 x 60 x 26.5 in)
|
