|
Magna-Power Electronics XR Series combines the best of DC power processing with microprocessor embedded control. A combination of high and medium frequency power processing technologies improves response, shrinks package size, and reduces cost. XR Series power supplies are current fed and are more tolerant to abusive loads than conventional switching power supplies. This technology allows the power supply to operate under short-circuit conditions, open-circuit conditions, and everything in between. XR Series power supplies offer both master/slave parallel and series operation. This enables two or more power supplies to be placed in parallel for increased output current or in series for increased output voltage. With master/slave operation, power supplies operate at near equal voltage and current. XR Series power supplies can operate as a voltage source or current source depending on the control settings and load conditions. If the power supply is operating as a voltage source and the load increases to a point beyond the current command setting, the power supply automatically crosses over to current mode control and operates as a current source at that setting. - 2 kW to 8 kW in a 2U package
- Models from 0-5 VDC to 0-1000 VDC
- Optically isolated user I/O circuitry standard
- High efficiency operation: Up to 88% efficiency on select models
- RS-232 interface standard with SCPI Commands
- Optional GPIB, USB, Ethernet (LXI-C), RS-485 interfaces
- Over Voltage and Over Current shutdown standard
- Certified LabWindows/CVI, LabView, and IVI Drivers
- Programmable Output Modulation: Emulates user-defined power profiles
- Automatic Voltage/Current Crossover
- Front Panel Calibration
- Made in USA
|
